The most effective and cost-efficient way to cool down any factory or industrial building. Our Open Space Cooler brand evaporative cooler series harnesses evaporative cooling technology to reduce air temperature and supply cool air.
Supply air performance of the Open Space Cooling system depends on the outside atmospheric conditions. It is able to take the outside air and reduce the temperature down by a potential 10˚ degrees Celsius depending on the outside relative humidity. As a general rule, the dryer and hotter the outside conditions, the better the cooling performance.
In typical South East Asia conditions, the supply air temperature can range from 21˚ to 30˚ degrees Celsius.
Designed to reduce your operating cost, the cooler can automatically run at lower speeds once a desired temperature is reached in the ambient air. Temperature Adaptive.
This is done by cutting off the pump operation once the humidity has risen above the set limit. The pump will re-start after the humidity falls back to the set limit.
Both Evaporative Cooler Series OS 18 and OS 30 can be managed by a single Wall Controller for up to 40 units of both series combined. This is made possible with the use of a hub connector that links up to 4 coolers.
The Open Space Cooler is equipped with the Munters CELdek cooling pads as standard. Munters CELdek pad has the following advantages :
Creates a cooling sensation as low as ΔTPTD-12°C depending on atmospheric conditions.
We design and build high-quality insulated air duct systems that transport the cool air produced by the Evaporative Coolers and deliver it to the fixed worker locations.
When you purchase a Waterline brand Evaporative Cooler, you can be confident that we will also provide the design, installation, and maintenance of a reliable and effective industrial cooling system.
